500 Shawmut Avenue • La Grange, Illinois 60526 • Tech Line 708/588-0505 • Fax 708/588-7181
#77905 - Power Steering Hose Kit - Bolt-on Reservor
Tools needed:
• 1” open end wrench
• 15/16” open end wrench
• 11/16” open end wrench
• Electrical/vinyl tape
• Hacksaw with fine tooth metal blade OR cut off wheel
Tech Tip:
Install the proper adapter into the Rack/Box. Do not use Tefon tape or pipe dope,
this can get into the system and do substantial damage. Inverted flare fittings should
be torqued to 25-24 ft/lbs and O-ring fittings should be torqued to 20 ft/lbs.
Applications:
• GM metric rack & pinion
• 1978 - present GM metric 800 gear box
• 1965 - 77 GM SAE 800 gear box
• Classic Performance Products - 500 Series box
• Flaming River rack & pinion
• Dodge Omni rack & pinion
• 1974-77 Ford Mustang II rack & pinion
* A power steering adapter kit (#77901) is available for other applications, call for info 1 (708) 588-0505.
Before Installing This Hose Kit:
Install the Tru Trac or V Trac system in vehicle.
Install the Bolt-on reservoir per the instructions included with reservoir.
Never run the motor without power steering fluid in the pump as
severe damage will occur and void the pump warranty.
If your application is not listed below...
Do Not Attempt To Install This Kit*
Step 1: Prepare the fittings and adapters for installation. Use the guide below to select the correct adapters for your application.
Compare the existing hose ends to the adapter if you are unsure of the box/rack that you have.
•Denotes number of fittings
required for the listed application
•
•
03/06/12
•
11/16-18 inverted flare to
-6AN power steering adapter
1/2-20 inverted flare to
-6AN power steering adapter
5/8-18 inverted flare to
-6AN power steering adapter
M18 x 1.5 O-ring to -6AN
power steering adapter
M16 x 1.5 O-ring to -6 AN
power steering adapter
M14 x 1.5 O-ring to -6 AN
power steering adapter
-6 AN 90° hose end
-6 AN straight hose end
GM Metric Rack & Pinion
• • ••• •
1978-up GM Metric 800 gear box
• • ••• •
1965-77 GM SAE 800 gear box
• • ••• •
Classic Performance Products
500 Series gear box
• • ••• •
Flaming River Rack & Pinion
• • ••• •
Dodge Omni Rack & Pinion
• • ••• •
1974-77 Ford Mustang II
Rack & Pinion
• • ••• •
•
•
•
•
•
•
•
Comentários a estes Manuais